Home

Atmel ATmega32A Development Board

Availability: Out of stock
Price: LKR 6500
         

Overview

The ATmega32 Development Board is a complete, cost-effective development board for the ATmega32. It is designed to give designers a quick start to develop code on ATmega32 MCU and makes them develop prototype device easily.

The ATmega32 chip is mounted on a device board, which can be separated from the mother board. Hence, easily changing MCU is supported. The ATmega32 chip is in DIP package and will randomly be ATmega32 or ATmega32A.

The ATmega32 Development Board Standard package comes with an ATmega32 device board, while the ATmega32 Development Board Premium package comes with the standard package, an additional spare ATmega32 device board, an Experiment Fittings Pack.

Features

The ATmega32 Development board provides a development platform for the Atmel ATmega 32 and ATmega 16 microcontrollers.

Key Features

·         USB powered

·         Support for 40 pin dip packages of both ATmega 32 and 16 microcontrollers

·         External target CLK 16MHz at 5V

·         On-board USBasp programmer

·         USBasp on operation indicator

·         On-board Serial-USB module (supported for both PL2303 and CH340)

·         4 pin Serial data output port (compatible for Bluetooth serial data transfer module )

·         On-board Real Time Clock DS1307

·         External power input facility 6V to 24V AC, can handle to drain up to 1A

·         Easy power mode selection switch and Red power indicator LED

·         7×2 +5V output pins (up to 1A)

·         7×2  GND output pins

·         5×2  3.3V output pin (up to 500mA)

·         ISP connector

·         8 Red LEDs

·         4 digit Seven Segment unit

·         16 × 2 LCD module

·         26 pins of GPIO (available both male and female pins )

·         2 PWM output pins

·         2 PWM indicator LEDs (Red and Yellow)

·         PWM based tone controller Piezo buzzer

·         Two mechanical user push buttons (connected to the External Interrupts on MCU )

·         Two mechanical user slide switches

·         I2C (two wire communication) port

·         Two Analogue input connector

·         On-board potentiometer connected to the ADC 0

·         Analogue signal input device connector (support for various kind of analogue sensors such as Temperature sensors, LDRs, IR receivers, etc.)

·         Easy power saving switch unit

Package

Development Board size: 150 x 130 mm
Package size: 170 x 150 x 50 mm
Package weight: 450 g

Package Contains:

·         1 x ATmega32 Development Board

·         USB programming cable

·         USB mini cable

·         ATmega32 microcontroller

·         16 × 2 LCD module

·         4 digit Seven Segment unit

·         2-pin wire x 3

·         User Guide